Q: What causes jars to break?

Here's some general question many people ask when starting out... If you have an FAQ you'd like to post please contact us.
Forum rules
These FAQs are aimed to assist preservers and those making dairy products.
Shadowgirlau
Posts: 2281
Joined: Sun Mar 30, 2008 4:57 pm

Q: What causes jars to break?

Postby Shadowgirlau » Thu Jun 05, 2008 10:22 am

A: There are several types of breaks that occur. Each break looks different and has specific causes.

Thermal shock is characterized by a crack running around the base of the lower part of the jar, sometimes extending up the side.
To prevent thermal breakage:
•Avoid sudden temperature changes, such as putting hot food in a cold jar, putting a cold jar in hot water, or placing a hot jar on a cool or wet surface. Keep jars in hot water until filled.
•Use a rack in the canner.
•Avoid using metal knives or spatulas to remove air bubbles or steel wool pads to clean jars.

Internal pressure break is characterized by the origin of the break on the side. It is in the form of a vertical crack that divides and forks into two fissures.
To prevent pressure breaks:
•Provide adequate headspace in jars for food to expand when heated.
•Keep heat steady during processing.
•Avoid reducing canner pressure under running water or lifting the pressure control or petcock before pressure drops to zero.
Impact breaks originate at the point of impact and fissures radiate from the point of contact. To prevent impact breaks:
•Handle jars carefully. Jars that have been dropped, hit, or bumped are susceptible to breakage. Test new jars that may have been mishandled (to see if they break) by immersing them in room-temperature water, bring to a boil, and boil 15 minutes.
•Avoid the use of metal tools to remove air bubbles.
•Avoid using old jars. Jars have a life expectancy of about 10 years.
Life is what happens to you while you're busy making other plans.
- John Lennon

Return to “FAQs and Tips/Tricks on preserving, canning and cheesemaking”

Who is online

Users browsing this forum: No registered users and 1 guest